Request help

Pool Equipment Repair in Dallas

When the pump and filter are running but something else on the pad is not, the problem is often a valve, timer, automation box, salt cell, or a leak at a fitting. North Texas summers keep equipment running long hours, hard water leaves scale on heaters and salt cells, and hard freezes can crack unprotected valves and plumbing on the pad.

Common symptoms

Safe checks you can do

Confirm the breaker and any GFCI are on, the water level is above the skimmer, and the filter pressure is not far above its clean reading. Write down error codes on the automation or salt system display. Leave wiring, gas, and refrigerant work to a qualified pro.

Repair or replace?

A pro can tell you whether a valve, cell, or control board can be repaired and what a replacement would involve. Ask for a written estimate and, if the work requires a license in your state, for that license number. We are a referral service, not a contractor. In Texas, ask any pool or spa contractor about their TDLR license and verify it at tdlr.texas.gov.

If the real problem is a leak, a pump, a heater, or a dirty filter, start with those pages instead: leak detection, pump repair, heater repair, or filter service.

Need a local pro?

Free referral to an independent Dallas–Fort Worth business. Requests accepted 24/7.

Request help online

Questions people ask

Can I keep running the pool if a valve is leaking?

If you can catch the water and the pump still has a prime, sometimes yes for a short time. A leak at a fitting can also let air in and cost you water. A pro can isolate and repair it.

My salt cell says it needs replacement. Is that always true?

Not always. A dirty cell, a flow problem, or a bad sensor can show the same error. Ask the technician to test the cell before you buy a new one.

Do you repair equipment yourselves?

No. We are a referral service operated by LeadGrid Holdings LLC. The independent business we connect you with does the work and sets its own prices.

Licensing note

We are a referral service, not a pool contractor. Texas has no statewide pool contractor license, but electrical work on pool equipment requires a TDLR-licensed electrician and gas piping for heaters a TSBPE-licensed plumber, and your city may require permits.

Related help

Sources and local resources

Sources checked November 19, 2026. Local rules change; confirm details with the agency.

Pool problem? Get matched with a local pro.

Free referral to an independent local pro. Requests accepted 24/7.

Request help online
Request help online